- Health & Safety
- Acetylene Safety
- Apparatus Safety
- Balloon Gas Safety
- Cylinder Safety
- Dispense Gas Safety
- Gas Cylinder Weights & Sizes
- Gas Risks
- Identifying BOC Gas Cylinders
- Safe Handling of Dry Ice
- Tank Safety
- Process Safety
- Product Fact Sheets
- REACH Legislation
- Safety Data Sheets
- Safety Services
- Workplace Safety
Carriage of cylinders by road
When you collect cylinders from a BOC Trade Outlet, you will be provided with the information you need to establish your obligations under the Carriage of Dangerous Goods and Use of Transportable Pressure Receptacles Regulations.
Everyone carrying gas cylinders in a vehicle should follow basic safety requirements. Drivers, should be trained in:
- the associated hazards and dangers of the goods
- safe handling of gas cylinders
- emergency procedures and the use of fire-fighting appliances
All training should be recorded and kept by both the employee and employer.
The training should be periodically supplemented with refresher training to take account of regulation changes and should be verified upon commencing a new employment.
Vehicles used for the transportation of gas cylinders should be open. If this cannot be achieved the vehicle should be well ventilated. Toxic gases must not be carried in a closed vehicle unless the vehicle has been specifically designed for the purpose.
A 2kg fire extinguisher is required on all vehicles carrying gas cylinders to fight engine and cab fires.
Cylinder valves must be closed whilst in transit and any equipment disconnected.
Cylinders should be secured properly and should not project beyond the sides or ends of the vehicle.
Cylinder labels are attached to all BOC cylinders. The label is produced in accordance with the current legislation. These labels must never be removed or defaced.
In addition to these general requirements you may need to make specific provision if your load is above a certain threshold.
It is each driver's responsibility to know whether the load they are carrying is above the threshold.
If a leak is suspected … park the vehicle in a safe place and contact BOC immediately.
Please see the BOC publication 'Guidance for Carriage of Gas Cylinders On Vehicles' (SFT/005035) for more information.
Carriage of cylinders in the works
Movement of cylinders within the works boundaries should be carried out with the same care as when moving them on the general highway.
Cylinders must be properly secured when being moved and, if transported in a van, precautions must be taken to avoid a build-up of gas which might affect the driver.