- About Linde
- BOC in the UK and Ireland
BOC Case Studies
- PLASTINUM™ GIM the success story
- BOC delivers wastewater treatment cost-savings
- Fuelling the future: BOC powers hydrogen transport
- Cold nitrogen gas: making fast work of underground fires
- Liquid nitrogen from BOC: vital to the bees’ needs
- IBL Cold Stores: finding the right alternative to R22
- Fuel cells: today’s technology for tomorrow’s cars
- Hymera: delivering power efficiently for smaller loads
- Overcoming structural distortions in welding
- BOC creates UK cryogenic storage facility
- BOC Customer Service: commitment to excellence
- The Harley Street Clinic: total solution to customer needs
- Carboflex®: Advanced Heat Treatment Solutions
- CIRRUS® VEC: Ensuring the highest emission control standards
- LINDOFLAMM®: reducing the risk of hydrogen cracking by pre-heating
- LINDOFLAMM®: removing of distortion in post welded steel
- Flame cutting: increasing productivity through efficient process
- How to Find Us
- Requirements of a Supplier to BOC
- BOC and Corporate Responsibility
- Safety, Health, Environment and Quality
- BOC Insurance
- BOC History
- Our Products and Services
- Tax Strategy
- Gender Pay Gap Report
- Secret World of Gases
- Company Profile
- The Linde Spirit
- Group Procurement
- Linde Worldwide
- Corporate History
PLASTINUM™ GIM: the success story
Engel Formenbau und Spritzguss wanted to improve their manufacturing process of high-quality gas injection-moulded components, so they came to The Linde Group to help search for the answers. Linde's liquid nitrogen flushing solution helped them to increase productivity and lower their costs.
BOC delivers cost-savings in wastewater treatment
Oxygen transfer and biomass separation systems from BOC have helped many industries extend the life of their wastewater treatment plants. Now BOC's unique wastewater technology called Axenis goes even further to produce high quality, reusable water and reduce costs for the industry.
Fuelling the future: BOC powers hydrogen transport
BOC has built and now operates the UK’s first open-access, 350/700 bar hydrogen refuelling station in Swindon. Developers and operators of hydrogen vehicles can register to fill up their vehicles at this state-of-the-art facility, situated within easy reach of London, the Midlands and Wales.
Liquid nitrogen from BOC: vital to the bees’ needs
The honeybee is in crisis. Colonies are disappearing at an alarming rate and the varroa parasite is the most likely culprit. Bee experts know that hygienic colonies have a better chance of survival. By helping the University of Sussex Laboratory of Apiculture and Social Insects (LASI) use liquid nitrogen to arrest the spread of disease, BOC is playing a key role in encouraging bee hygiene and saving the world’s most vital crop-poll.
IBL Cold Stores: finding the right alternative to R22
European legislation is leading to a phase-out of HCFC refrigerant gases. This poses a number of challenges for the coldstore sector. BOC's specialist refrigeration expertise has helped IBL Cold Stores identify and implement a cost-effective solution.
Fuel cells: today's technology for tomorrow's cars
Hydrogen fuel cell technology offers a sustainable transport solution. Using hydrogen to produce the electricity which powers the engine, this 'in car' capability has the potential to bring about a step-change in personal mobility. It is a concept supported by BOC, and successfully demonstrated by the Riversimple local car.
Hymera: delivering power efficiently for smaller loads
The move to a low carbon economy calls for alternative fuel sources. Hydrogen fuel cell power generation delivers this. It brings the benefits of hydrogen, the world's cleanest fuel, to high-efficiency, low power electrical appliances such as TVs, traffic management systems and surveillance cameras. Hymera, a BOC innovation, marks a critical step-change in the transition to clean, off-grid electrical power generation and a greener environment.
The MALCO process: overcoming structural distortions in welding
The performance of robotic welding systems can be compromised by distortion that occurs in the welded structure. Manufacturers have long been seeking a Low Stress No Distortion (LSND) welding system that strengthens the structure without interfering in the welding process. BOC has developed a solution to the problem employing cryogenic cooling technology.
Safe and secure: BOC creates UK cryogenic storage facility
Safe, secure cryogenic storage of samples is a key factor in reducing risk and driving growth for today's multi-million pound medical research environment. Many research organisations wish to maintain their focus on what they do best and outsource their storage needs to a specialist centre. The BOC Cryobank provides just this resource - perfect, ultra-low temperature storage for the UK's leading experts in cryogenics.
BOC Customer Service Centre: a commitment to excellence
BOC's Customer Service Centre (CSC) has been awarded the nationally recognised Investors in People (IIP) Silver Standard. The Silver Standard is awarded to only one percent of the organisations assessed, placing CSC in a lead role in terms of Best Practice within The Linde Group and demonstrating its commitment to people excellence.
CIRRUS® VEC: Ensuring the highest emission control standards
Aesica turns to its long-standing business partner BOC to help it control emissions from a new exhaust gas stream. Already a buyer of liquid nitrogen, Aesica was keen to explore how Linde’s VOC abatement solution, CIRRUS® VEC (Vapour Emission Control), could not only resolve its emission control challenge, but also enable it to get better value from its liquid nitrogen.
LINDOFLAMM®: reducing the risk of hydrogen cracking by pre-heating
The risk of hydrogen cracking is an ongoing concern for steelwork contractors. BOC were approached by a customer to review how hydrogen cracking could be reduced which had become more frequent since production output was increasing. A solution to both the quality and productivity issues was found by using BOC’s patented LINDOFLAMM® special burners with Acetylene.
LINDOFLAMM®: removing of distortion in post welded steel
BOC were approached to provide a solution to remove distortion in the deck of a ship. The unevenness was caused whilst welding small sections of steel together to create a very large, flat steel surface. BOC provided a solution to use an oxy-acetylene flame to remove distortion.
Flame cutting: increasing productivity through efficient process
A leading UK steelwork contractor approached BOC to improve their productivity in their cutting process. One of the main areas BOC helped support the customer was by removing bottlenecks which had begun developing in their cutting procedures.