- Products & Supply
- Industrial Gases
- Bulk Industrial Gases
- Refrigerant Gases
- Drinks Dispense Gases
- Balloon Gas & Equipment
- Speciality Gases
- Speciality Gases Equipment
- Dry Ice
- Plastics & Rubber Solutions
- LINDOFLAMM Special Burners
- Glass Processing Products
- Sulphur Recovery Burner Technology (SUREburner)
- Pharmaceutical Products
- Food Preservation Solutions
- Industrial Products
- Industrial Catalogue
- BOC Safety Products
- Leisure & Outdoor Products
- Cryogenic Equipment & Storage Vessels
- Packaged Chemicals
- Healthcare Equipment
- Helium Gas
- Liquefied Natural Gas (LNG)
- Gas Supply Options
- Gas Cylinder Innovation
- Gas cylinder tracking
- Products and Services A - Z
- Good penetration and fusion profiles.
- Excellent arc stability.
- Low distortion.
- Low oxidation potential.
- Low levels of nitrogen and moisture.
Buy Argoshield Light Online
- Easy to use, providing a sound weld at minimum cost.
- Has a low oxidation potential.
- Can also be used for MIG welding standard-grade stainless steel in less critical applications.
- High strength welds.
- Minimal splatter producing good appearance and finish.
- Minimises post-weld treatment and rework.
- Low porosity and other defects.
Applications and uses
- Specially formulated for MIG welding sheet and thin sections of mild steel less than 4mm thick.
- Can be used on mild steel sections thicker than 4mm but care must be taken to ensure the weld integrity is not compromised.
- Ideal for duct and sheet-metal engineering industries.
- A suitable gas in automotive component manufacturing and vehicle repair as it provides dip transfer in all positions with solid wire.
- The oxidising potential of this mixture has a tendency to produce welds with a black surface film. In many stainless steel applications, this type of surface finish would be considered unacceptable and removal of the surface film would be required. Cleaning away this residue can be both time-consuming and costly. Due to this, other products such as the BOC Stainshield range of gases would be recommended.
The Argoshield range is non-corrosive provided moisture is absent and is compatible with any common metal provided the equipment is designed to withstand the process pressure of a compressed gas cylinder.
In general it is not recommended that Argoshield mixtures are used in conjunction with Flux Cored Wires. This is because many of the formulations are particularly sensitive to the oxygen contained within the Argoshield mixtures. If the Argoshield mixtures must be used, it is recommended that tests are carried out to determine whether any problems occur and the correct procedure to follow is understood.
The new GENIE® cylinder from BOC
Argoshield Light is now available in the new GENIE® cylinder from BOC.
Available in 10L or 20L, GENIE® contains 30% more gas than a standard steel cylinder and it uses digital display technology to tell you how much gas it contains. With attachable wheels, it is more portable.
Argoshield Light should not be used for welding stainless steel or nickel alloys because carbon from the shielding gas will be introduced into the weld (carbon pick-up). For these applications, BOC Stainshield Universal is suitable.