Features
- permits continuous supply of process gas with automatic changeover on low cylinder pressure.
- suitable for use with corrosive and non corrosive high purity and laboratory grade gases.
- single stage regulator included.
- compact size and light weight for easy installation
Specification
- Materials: Flexible connectors-stainless steel convoluted or PTFE lined hoses. All other gas wetted components- Brass or 316 stainless steel
- Max inlet pressure: 200 bar
- Outlet pressure: 0-1.7 bar, 0-5.1 bar
- Dimensions (wxhxd): 240mmx280mmx140mm (excluding flexible hoses)
- Hose length: 600mm
Select the model you require:
ACU-HP
Standard Supply | Options |
---|---|
Flexible hoses with cylinder connectors | V-High pressure vent valves |
Cylinder contents gauges | P-Full inert gas purging (stainless steel units only) |
Automatic changeover valve | A-Low cylinder pressure alarm (pressure switch) |
Pressure regulator | TS-Two stage regulator |
Outlet pressure gauge | IV-Isolation valve on outlet |
1/4" compression fitting outlet | R-Relief valve |
How to order
ALWAYS specify gas or mixture to be used:
- select purity level eg.brass,high purity or stainless,high purity
- select cylinder gauges eg.G (0-4000 psi),L (0-1000 psi),E (0-400 psi)
- regulator delivery pressure 25 (0-25 psi),75 (0-75 psi),300 (0-300 psi)
- select cylinder connector eg.BS3
- select any additional options eg. V,P,A etc