HP1500T Series

HP1500T is a single-stage, stainless steel regulator with tied diaphragm design for positive shut off, reducing the risk of overpressure on the outlet. High specifications make this suitable for N6.0 gases.

The tied diaphragm feature makes this regulator particularly suited to gases with more demanding properties – eg highly corrosive gases and gases with high levels of toxicity. Accepting inlet pressures up to 230bar, it has a choice of delivery pressure ranges from 0 – 2bar, to 0 – 5bar.

Features

Stainless steel body with smooth surface finish for minimal particle generation
Tied diaphragm for positive shut-off and metal to metal seal for high leak integrity
Precise pressure control
Panel mount holes in rear and thread on bonnet
Quick purging through low internal volume and internally threadless nozzle assembly

Standard supply includes:

Inlet connection and gauge
Outlet gauge, outlet valve and compression fitting

Specification

Body: 316L stainless steel
Seat: PCTFE
Diaphragm: 316L stainless steel
Maximum inlet pressure: 230 bar (or as limited by inlet gauge and components)
Flow rate: Cv = 0.04
Surface finish: 15-20 microinch standard
Operating temperature: -40°C to +65°C
Weight: 2.0kg (approx). Dimensions (mm): 235 (W) x 140 (H) x 130 (D)

Select the model you require:

Model	Outlet gauge bar (psi)	Outlet gauge bar (psi)	Relief Valve Setting (bar)
HP1500T	0-2 (0-30)	30" vac-0-4 (30” vac-0-60)	None
HP1501T	0-5.2 (0-75)	30" vac-0-7 (30" vac-0-100)	None

Additional Options

Option	Use	Models available
Purge assembly	To purge toxic, corrosive or high purity gases from the regulator body to prevent accidental exposure and maintain process gas purity	Body purge (P), Lever valve cross purge (LPS)
Relief valve	For regulator protection	Relief valve (outlet)
Filter	Particle removal down to 0.1 micron	FBT (inlet), FBL (outlet)
Excess flow	Will shut off system when flow rate exceeds preset level	EFV190